dual-fiber 8 channels bidirectional concourse
protocol: seamless connection with ethernets,sdh networks and fiber
rate: 10mbps-1.25gbps adaptive, 2.5g optical module;
extensible: 2～16 wave channels (optional);
network topology: point-to-point, point-to-multipoint;
fiber access: single mode, multi mode;
twisted-pair access: 10base-t,100base-tx,1000base-t;
power supply: ac220v,dc-48v;
19-inch chassis structure, convenient for installation and use;
a maximum of 16-channel transmitting/ receiving optical signals can be
multiplexed to a pair of fibers for transmission;
open structure, supporting inter-connection and inter-working with other
hioso c5000 series cwdm devices can effectively replace layout of optical cables, which improves bandwidth utilization at a low cost. it is applicable to the construction of short and medium-distance ip broadband metropolitan area networks (mans) and access networks, especially applicable to network carriers who: 1) cannot lay optical cables conveniently , 2) rent optical cables , 3) do not have sufficient optical cables, 4) want to improve the bandwidth tilization of optical cables.
hioso c5000 series devices are developed on the basis of cwdm technology, through which multiple wavelength channels with a wavelength interval of 20nm are multiplexed into one or a pair of fibers to implement signal transmission; it can be used in point-to-point and point-to-multipoint application, and can also work with wavelength routers. with the application of non-cooling laser technology and edfa technology, it has great cost advantage in building broadband mans and access networks. it can provide interfaces in multiple data formats, such as e,fe,ge ,stm-1/4/16 interfaces and fiber channels.
external interface: interface for out signal input; interface type can be rj45 or fiber port, connecting with switches and fiber optical converters etc, to implement signal input.
internal interface: cwdm signal conversion port; output signal wavelengths are cwdm wave band (1470nm-1610nm), easy for multiplexing and output.
com: multiplexing signal output port, a port for signal output after multiplexing; interface type is sc.