1fe+1fx media converter -凯发网

1fe+1fx media converter

 adaptive 10mbps and 100mbps environments, for the convenience of network upgrade;
 efficient built-in switching core, to implement flow control and reduce broadcast packets;
 supporting full-duplex and half-duplex transmission modes and capable of automatic
negotiation;
 supporting automatic crossing of twisted pair ports, for the convenience of system debugging
and installation;
 supporting the transmission of extra-long packets (with the maximum length of 1552 bytes);
 supporting the transmission of extra-long packets over vlan:
 supporting quality of service (qos) and ensuring transmission of voip packets;
 supporting spanning tree protocol (stp) to form a redundant network;

 low power consumption, low heat and capable of stable operation for a long period time;
 supporting multiple types of fiber ports, such as dual-fiber multi-mode,dual-fiber single-mode
and single-fiber single-mode, to satisfy the extended requirements of users.

description
parameters
solution
information

hioso fc610a is a kind of 10/100mbps adaptive fast ethernet fiber media converter (also called
optical-to-electric medium converter), which can implement mutual conversion between
10base-t/100base-tx twisted pair electrical signal and 100base-fx optical signal. this type of fiber
converter can extend the transmission distance of a network from 100m over copper wires to 120km
(single-mode full duplex). fc610a supports two different types of network connection medium:
10/100base-tx and 100base-fx, with the application of the switching technology and the storing &
forwarding technology. it supports transmission in dual-fiber multi-mode, dual-fiber single-mode and
single-fiber single-mode fibers.

parameters	specifications
access mode	10/100mbps
standard	ieee802.3 10base-t ethernet, ieee802.3u, 100base-tx/fx fast ethernet, ieee802.3x flow control, ieee802.1q vlan, ieee802.1p qos, ieee802.1d spanning tree
wavelength	850nm/1310nm/1550nm
transmission distance	dual-fiber multi-mode: 2km; dual-fiber single-mode: 25/40/60/80/100/120km, single-fiber single-mode: 25/40/60/80/100km category-5 twisted pairs: 100m
port	one rj45 port: connected to stp/utp category-5 twisted pairs one fiber port: multi-mode – sc or st (fiber size: 50,62.5/125μm) single mode – sc/fc fiber port (fiber size: 9/125μm) single-fiber single-mode – sc/fc fiber port (fiber size: 9/125μm)
conversion mode	medium conversion, storing and forwarding
mac address table	i k
buffer space	1mbit
flow control	full duplex state: flow control; half-duplex state: back pressure mode
delay	9.6μs
bit error rate	<1/1000000000
mtbf	100,000 hours
led	power (power), fx link/act (fiber link/action) fdx (fx full-duplex mode), tx link/act (twisted pair link/action) tx 100 (twisted pair, transmission rate: 100m)
power	dc5v 1a (external), ac220 0.5a/dc-48 (built-in)
power consumption	3w
operating temperature	-10~55°c
operating humidity	5%~90%
storage temperature	-40~70°c
storage humidity	5%~90% (non-condensing)
dimensions	24mm(h)59mm(w)98mm(d) / (height * width * depth) (external power) 26mm(h)85mm(w)135mm(d) / (height * width * depth) (built-in power) 110mm(h)22mm(w)81mm(d) /height * width * depth (module card)