3 ports active eoc slave with wifi -凯发网

3 ports active eoc slave with wifi

ha303wifi is used at catv cable network to establish a layer 2 ethernet transmission channel. it can transmit and receive ethernet signal through catv coaxial cable but not interfere the catv signal.
ha303wifi eoc slave adopts the most advanced chip technology. it supplies one rf hybrid signal input port, one rf catv output port and three 100m full-duplex rj45 to connect pc, digital set-top-box and ip phone, etc. it also supplies wifi 11n routing function.

parameter		description
standards		homeplug av, ieee 802.3u, ieee802.1q, ieee802.1x, eee 802.11b/g/n
ports	wan	1 thread cable port
	lan	3 10/100m rj45 ports
	tv	1 catv coaxial port
wifi	operation arrange	2.4~2.4835ghz
	transmission speed	11n: 270/243/216/162/108/81/54/27mbps 135/121.5/108/81/54/40.5/27/13.5mbps 130/117/104/78/52/39/26/13mbps 65/58.5/52/39/26/19.5/13/6.5mbps
		ieee 802.11g: 54/48/36/24/18/12/9/6
		ieee 802.11b: 11/5.5/2/1m
	operating channels	13
	data modulation	dbpsk,dqpsk,cck, ofdm(bpsk/qpsk/16-qam/64-qam)
	sensitivity	270m: [email protected]% per;130m: [email protected]% per; 108m: [email protected]% per;54m: [email protected]% per 11m: [email protected]% per;6m: [email protected]% per 1m: [email protected]% per; (typical value)
	transmission distance	maximum 120 meters (indoor) maximum 360 meters (outdoor) (according to environment)
	rf power	20dbm eirp
	antenna	3dbi detachable hg antenna
eoc	frequency	7.5-30mhz
	data modulation	bpsk/qpsk/8-qam/16-qam/64-qam/256-qam/1024-qam/robo
	transmission speed	physical layer:200mbps
	ip	50-85mbps
	rf impedance	75 ohm
led	wan	wan lighting: link / blink: data transmission
	lan	lan lighting: link / blink: data transmission
	other	power(on/off) / eoc(initialization status)/ wireless(on/off)